Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide-Accessories-Mr Pool Man
Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide-Accessories-Mr Pool Man
Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide-Accessories-Mr Pool Man
Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide-Accessories-Mr Pool Man

Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide

$1,771.82 Save $-1,771.82 ( 0% off RRP of $0.00 ) i
  • Delivered in days to i
  • Lifetime after-sale support i
  • Lifetime after-sale support i
  • Available for preorder i
  • Order ships within days i
  • Free Shipping Australia Wide i
  • Back in stock soon i
  • In stock i

Acoustic Box Pump & Filter Enclosure (Backless) - 1350mm Wide

$-1,771.82 (0%) off RRP of $0.00 i
  • Product Description

  • Shipping and Returns

  • Reviews

Product Description

The Acoustic Box comes in various sizes and configurations to cater for every layout.

The slim models cater for more confined spaces whilst the backless models cater for situations when you have less than 50mm from the equipment to the wall / fence.

The smaller models (< 1100mm in width) will easily fit a filter (cartridge or sand), a pump, a chlorinator, and the power points. The larger models (> 1100mm in width) will fit a filter (sand or cartridge), multiple pumps, spa blowers, chlorinators and more.

Single units have 1 access point from the front (fully removable door) and 1 from the top (lid opens by approx. 1 metre). Double (and larger units) have 2+ removable front doors and 2+ top lids.

Reduces noise by 80%! – Assembles in as little as 15 minutes with absolutely NO NUTS / BOLTS or any TOOLS. Galvanized & Powder Coated – Rust Proof. Protects your Pool Pump / Filter with engineered ventilation gaps, easy lift out access from front and top.

Please note - This is the backless option




  • Reduce noise by 80% - 29/400 grade foam on every panel reducing noise and certified by an independent Acoustic Engineer
  • Assemble in as little as 15 minutes - NO NUTS, BOLTS or any TOOLS needed.
  • Save money on design - A custom designed box made from timber or other material will usually cost more - and won't look as good!
  • Save money on equipment- Inferior or cheaper alternatives may cost you more money in the long run as they may be poorly ventilated and damage your equipment.
  • Save money on running costs - A properly soundproofed box means that you can save money on electricity by turning on your equipment at night / during off-peak
  • Comply with all state and council requirements with regards to soundproofing and any other structural aspects.
  • Ventilation gapsThere're also 25mm ventilation gaps at the front and back of the box allowing for proper air-flow in and out of the box to protect the equipment.
  • Are industrially designed to provide enhanced sturdiness yet lighter than other models on the market

  • Made of 0.9mm Australian made (BlueScope™) galvanized steel with a thick (Dulux Colorbond™) powder coat finish
  • Come with clear 3D  & Illustrated installation instructions
  • 10 Standard colours - custom colours available on request for a small fee
  • Child safety features - making it difficult for children to access the box
  • 100% Australian Made



The unique design of our Pool Filter / Pump enclosures means that there are absolutely NO NUTS & BOLTS and NO need for any TOOLS to assemble the box. On average, models that are <1.7m in width (single) take 15-20 minutes to assemble and models that are >1.7m (double) take 45 - 60 minutes.

The panels are joined together at the bottom by 4 corner brackets and locked at the top by 4 corner caps.

 The box comes flat packed and is either hand unloaded by our driver at destination (Sydney metro deliveries) or packed in large cardboard boxes (for regional and interstate deliveries) . 


Notes with regards to measurements:

  • The external measurements are actually the same as the internal measurements throughout the box with the exception of the bottom and top of the box - where the metal bends to allow for the acoustic foaming to be housed.
  • It is advisable to allow for an additional 10-20mm on all asides of your Concrete slab (if laying the box on a slab)
  • The lid requires 45mm of clearance at the back to fully open. So pls allow this (or more) if placing the box against a wall or other hard surfaces.
  • Backless models are always 50mm deeper than the standard models
  • They are needed when there’s less than a 50mm gap from the equipment (EG a pipe of the filter) and the wall / fence. You will also need to allow approx. 20mm to slide in the rear panel i.e. 65-70mm in total.
  • The design of the backless models means the lid won’t hit the wall or fence behind when fully erect
  • Backless models have 3 additional parts (or multiples thereof for the larger models) instead of the rear panels. These are 2 wall strips ; one on either side of the enclosure and horizontal bridge which goes over from one wall strip to the other to fully enclose the box


*Please note images are for colour and size reference, measure and select the correct size you require with the colour of your choice.



Shipping and Returns

Standard Shipping – FREE standard shipping on orders over $25*

  • NSW, QLD & VIC - 2 - 5 business days
  • WA, SA & NT - 5 - 10 business days


Express Shipping - From $9.95 - Cost calculated at checkout

  • Metro NSW, VIC, QLD - 1 - 2 business days
  • Metro WA, SA, NT & TAS - 2 - 3 Business days
  • Regional Australia 3 - 4 Business days


Bulky and Oversized Shipping - Orders that are obviously large, heavy and bulky will be sent on a pallet, and may require a forklift to unload, OR if a forklift is not available, hand unload will be required. This is the customers responsibility entirely, and if delivery cannot be made to the address due to accessibility or unload reasons, it will be taken back to the depot for pick up from the customer or possible re-delivery. Please note that if there are additional charges for re-delivery etc this will be the responsibility of the customer.

Items marked as "Bulky & Oversized" will incur a shipping charge at checkout calculated by your location.

Remote Locations - Due to some regions of Australia being remote, we cannot ship to these locations for free of charge. If we can ship to them a cost will be calculated at checkout, if there is no shipping option at checkout our carriers cannot reach your location.

International Shipping - International Shipping (rest of the world) - Cost calculated at checkout, Estimated delivery time for international orders is 5 - 15 business days.

New Zealand Shipping - Cost calculated at checkout. Estimated delivery time for New Zealand orders is 3 - 7 Days.

*Please note all estimated shipping times are exactly that, an estimate based on normal delivery operations, In the case of a pandemic, holiday sale periods, restricted borders or closed mail sort facilities these times may vary and Mr Pool Man cannot be held accountable for these delivery time frames.

Delivery excludes remote locations such as islands from the Australian mainland, Free standard shipping includes land transport only, any deliveries that require marine or aerial logistics is not included under the Free Shipping offering. Customers will be required to cover any additional delivery costs or you may be asked to collect your article from the nearest depot. 



Returns Policy

Mr Pool Man offers easy 60 day returns for peace of mind.

  • Made an incorrect purchase? No problem, all orders that were incorrectly purchased or “change of mind” will simply incur a small $10 return shipping label fee that will be deducted from your refund, as this is what it costs to get your order back to us. 
  • From there, providing you use our Returns Centre, your return is fully tracked on its way back to us. Your return will then be processed within 10 business days of being delivered at Mr Pool Man.
  • Any initial shipping costs are not refunded.
  • If you are returning an order that is outside of the 60 day returns window, please contact us with your order details.
  • Pool Cover(s), Pool Roller(s), Pool Heater(s), Selected S.R Smith products, Filtration media (glass & sand), PCB Control board(s) and mineral salts are not eligible for return, unless standard warranty policies apply.
  • "Pre-Order" products which are custom ordered in will incur a 20% restocking fee of the product price. Suppliers also charge the same restocking fee to Mr Pool Man to return goods to them. This fee will be deducted from your refund.