It’s quality that makes Astral one of Australia's leading manufacturer of quality swimming pool and spa products. Astral's aim is to provide the best-quality equipment for commercial and private swimming pools and spas at competitive prices.
There is no substitute for any of the essential elements that ensure durability, quality and dependability within the Astral range of equipment, parts and accessories. Delivering performance, efficiency and quiet operation in every facet of the Astral product. If you fit inferior, non-genuine equipment and parts, you might save money in the short term – but you’re risking damaging the efficiency, reliability and long-life of your Astral pool equipment.
"The durability of Astral equipment is second to none, we have just had a new pool built, fitted with a Pump, Filter and Salt Water Chlorinator and you can see the quality in the products!” - Christine
Mr Pool Man is a certified and reputable Astral dealer, all products are backed by standard factory warranty and we provide extensive pre purchase troubleshooting to assist in ensuring the first purchase is the correct one backed with after sales support on all Astral equipment for lasting performance for years to come.
The Viron eQuilibrium Chlorinator provides a range of options to minimise or eliminate the change in water balance. This dramatically reduces manual water testing, maintenance or corrective actions required for your pool water. The Viron eQuilibrium Chlorinator can even test, monitor and maintain the perfect level sanitiser and pH balance to keep your pool safe, healthy and looking great.
Features:
- Pools up to 80,000L topical climate
- Pools up to 120,000L temperate climate
- Salt level 3800 - 8000 ppm
- Dosing 35 grams per hour
3 INTELLIGENT SYSTEM ADD ONS
- Viron eQuilibrium Salt Chlorinator (standard)
- Viron eQuilibrium 2 with pH balance
- Viron eQuilibrium 3 with pH balance & chlorine management
- eQuilibrium Ai Mode for control of pH balance, chlorine and water flow for complete swimming pool experience.
- Does not include the ORP and pH probes, these are separate kits that can be purchased at $500 each.
CHLORINATORGO BLUETOOTH® APP CONTROL
Take control of your AstralPool Chlorinator to the next level by going wireless with Bluetooth® control.
- View your water balance
- Auto or direct manual control
- Schedule and adjust timers
- Control compatible AstralPool pumps and lights
Salt Water Chlorinator Installation Overview:
Installing a salt water chlorinator is an interesting DIY project which just requires a bit of elbow grease and familiarity with some basic tools.
For NEW salt water chlorinator installations:
- Raise the salt levels in your pool to the recommended levels and allow to circulate for at least 8 hours. Don’t forget to balance your water.
- Turn off all power to your pool and close off any valves after your pump.
- Measure off area for salt cell installation with included template.
- Measure again.
- With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories.
- Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual.
- Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required.
For more information on converting your regular pool to a salt water pool, you can check out our extensive guide here. (Don’t worry, it will open in a new window)
For REPLACEMENT salt water chlorinator installations:
- Turn off all power to your pool and close off any valves after your pump.
- Measure off area for salt cell installation with included template. If your new salt cell is shorter than your current salt cell, you may need to install new pipes from your pump or heater.
- If your new salt cell is longer than your current one, then no problem, simply measure again.
- With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories.
- Remove the old power box / control box.
- Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual.
- Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required.