H2Flo ZEN Salt Water Chlorinator 30G

The Zen Self cleaning chlorinator is designed in Australia to cope with our harsh environmental conditions.  Combining industry proven technology with quality commercial grade cell materials and a smart embedded micro-controller. The self cleaning cell is a standard inclusion with the ZEN chlorinator, helping to reduce
maintenance. A compact sealed design built for Australian conditions. 

Features:

• Reverse Polarity (RP) technology – meaning the chlorinator periodically switches between positive and negative charge resulting in less calcium build up and less maintenance.
• Circuit breaker – designed to protect your pool system in the event of a power surge or overload.
• Pump output socket – 240 volt supplied to synchronise your chlorinator and pool pump.
• Warning indicator lights – for easy and safe operation.
• Chlorine controller and output indicator
• 3 year Warranty
• Australian made
• 30gram per hour
• 60,000L pools

Salt Water Chlorinator Installation Overview:

Installing a salt water chlorinator is an interesting DIY project which just requires a bit of elbow grease and familiarity with some basic tools. 

For NEW salt water chlorinator installations: 

• Raise the salt levels in your pool to the recommended levels and allow to circulate for at least 8 hours. Don’t forget to balance your water. 
• Turn off all power to your pool and close off any valves after your pump.
• Measure off area for salt cell installation with included template. 
• Measure again. 
• With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories. 
• Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual. 
• Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required. 

For more information on converting your regular pool to a salt water pool, you can check out our extensive guide here. (Don’t worry, it will open in a new window)

For REPLACEMENT salt water chlorinator installations: 

• Turn off all power to your pool and close off any valves after your pump.
• Measure off area for salt cell installation with included template. If your new salt cell is shorter than your current salt cell, you may need to install new pipes from your pump or heater. 
• If your new salt cell is longer than your current one, then no problem, simply measure again. 
• With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories. 
• Remove the old power box / control box.
• Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual. 
• Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required.