Spa Electrics Photon GK Kit 2 x Blue LED Light + Transformer + 20m Cable

Spa Electrics is the leading manufacturer for underwater LED lights to suit both commercial and domestic pools and spas. The range of Spa Electric LED pool lights are designed and manufactured here in Australia with Mr Pool Man a leading distributor of the premium LED lights.

Spa Electrics LED lights offer peak performance, easy operation and is quick to install, Retro fitting 99% of existing surface mount pool lights within 20 minutes! Works with existing transformers and includes detailed installation instructions Suitable for all residential and commercial applications.

Features:

• Advanced LED technology, patented cable connections and IPX8 water-ingress protection deliver top durability, year after year
• Brightest LED Lights on the market. Equipped with high-intensity tri-color LEDs, they provide brighter illumination than traditional halogen pool lights
• Save up to 88% energy than a normal 100watt halogen pool light. Ceramic Light Engine technology delivers maximum brightness while consuming less than 12 watts

Specifications:

• Suitable for new Concrete pools
• 12 Months Warranty
• L.E.D. life of 50,000hrs (rated)
• Kind to the environment, operating on approximately 88% less energy than a normal 100watt halogen light
• Direct Connect Patented electrical connection eliminates possible sources of water entry 
• Variable Voltage Operation on all 12, 24 & 32v AC Transformers
• IPX8 waterproof rating
• Overall Diameter: 238mm
• Thickness off the pool surface: 56mm
• 2 retro fit brackets can be drilled to fit existing screw configurations

2 x Spa Electrics BLUE LED Surface Mount Light

1 x Spa Electrics LV50 Transformer

2 x Spa Electrics 20m Cable

2 x Spa Electrics Concrete Mounting Kit Included

Easy Installation Notes:

Installing or upgrading your current pool lighting system can be done in as fast as 15 minutes per light fixture!

• To be completely safe, turn off the mains to everything connected to your pool. 
• Ensure that your power supply is currently outputting 12v. If not, you will need a pool LED light transformer.
• Unmount your existing pool light (be sure to keep the screws in a safe place) and bring the lights at least a meter away from the surface edge of the pool and on to a towel to be safe.
• Cut the cable as close to the existing light as close as possible. 
• Wipe down everything (including your hair!) to prevent water from dripping into exposed wires before you strip and connect the new lights according to the included instructions. 
• Test the pool light, coil the cable to the rear of the light and re-mount back into the pool. 
• Don’t forget to re-set your pool timers.